Bullet, Attack & Blast Resistant Windows

NS3000 Series - Steel
NS3000S Series - Stainless Steel

Norshield windows meet or exceed national and international standards

UL Levels 1-8, NIJ I, II, III, IIIA, IV, DIN C1-C5, SD-STD-01.01 DOS Ballistic, Forced Entry; and Blast
Constructed of bullet resistant steel "Norplate" appropriate for the specified threat level
May be used individually or assembled for guard booths, security closures, etc.
Variety of frame profiles available to meet specific security glazing, threat level or sight lines
Factory glazed and finish painted (6 standard colors) in most instances
Come complete with all gaskets, shims, and installation accessories
Available as built-in/bolt-on unit or as a clamp-on assembly
Stainless steel, bronze or aluminum clad finishes optional
Options include thermal break framing, transparent, architectural or opaque glazings and sliding windows

For secure communication and/or transactions

UL Levels 1-8, NIJ I, II, III, IIIA, IV, DIN C1-C5, SD-STD-01.01 DOS Ballistic and Forced Entry
Deal Tray is UL Listed and certified to the same ballistic level as the window framing and is designed to permit optimal transfer of parcels and packages
Constructed of bullet resistant steel "Norplate" appropriate for the specified threat level
May be used individually or assembled for guard booths, security closures, etc.
Variety of frame profiles available to meet specific security glazing, threat level or sight lines
Factory glazed and finish painted (6 standard colors) in most instances
Come complete with all gaskets, shims and installation accessories
Available as built-in/bolt-on unit or as a clamp-on
Stainless steel, bronze or aluminum clad finishes optional
A wide variety of natural voice transmission frame designs available
Options include thermal break framing, transparent, architectural or opaque glazings.

Meets Department of State SD-STD-01.01 Revision G Forced entry and ballistic requirements for high power rifle and 15 minute force protection.
Available in single, multi lite, or teller window configurations.
Windows can be used in interior applications, galvanized for exterior use, or wherever a 15 minute threat level occurs.
Standard paint finish is Sherwin Williams Polane Polyurethane Enamel.
Shipped as pre-glazed assemblies with NG-225 insulated glazing.
DOS model # for 15 min. single windows GWT-15R-NOR-03.
DOS Code for 15 min. single windows 1123.
DOS model # for 15 min. teller windows GWT-15R-NOR-01.
DOS Code for 15 min. teller windows 1123.
Window frames are all welded steel assemblies.
Frame dimensions are 1 7/8" x 5 5/8"
Windows can be anchored to steel, masonry, or concrete construction.

Meets Department of State SD-STD-01.01 Revision G Forced entry requirements and is designed to withstand 5 min. of forced entry protection from a variety of tools.
Available in single, multi lite, or teller window configurations with, both, vision and opaque security panels.
Windows can be used in interior applications, galvanized for exterior use, or wherever a 5 minute threat level occurs.
Standard paint finish is Sherwin Williams Polane Polyurethane Enamel.
Shipped as pre-glazed assemblies with NG-75 glazing.
DOS model # for 5 min. single windows GWT-05N-NOR-01.
DOS Code for 5 min. single windows 1141.
DOS model # for 5 min. teller windows GWT-05N-NOR-02.
DOS Code for 5 min. teller windows 1141.
Window frames are all welded steel assemblies.
(2) frame styles available 2 1/2" x 6" or 1 7/8" x 4 1/8".
Windows can be anchored to steel, masonry, or concrete construction.
5 minute windows are available with or without tube subframes.

Used with an NS 7000 Series door, the unit provides a complete security barrier

UL Levels 1-8, NIJ I, II, III, IIIA, IV, DIN C1-C5, 7.62 NATO, 5.56 mm
Suitable for a variety of applications and easily upgradable
Conventional look will not intrude upon its surroundings
Standard framing has 2" or 2-1/2" face profile and 4-1/2", 5-1/2", or 6-3/4" deep. Custom profiles available
Can accommodate glazing thickness from 1/4" to 2-3/4"
Factory or field glazed
Retrofit or new construction
Options include thermal break framing, transparent, architectural or opaque glazings and sliding windows
Tested for air & water infiltration in accordance with ASTM E283 and ASTM E331
AAMA certified for CRF and structural performance
Independently certified for blast resistant applications

Used in banks, check cashing, guard and toll booths, store windows and gas stations or anywhere there is a potential threat

UL Levels 1-8, NIJ I, II, III, IIIA, IV, DIN C1-C5, 7.62 NATO, 5.56mm
Suitable for a variety of applications and easily upgradable
Conventional look will not intrude upon its surroundings
Standard framing has 2" or 2-12" face profile and 4-1/2", 5-1/2", or 6-3/4" deep. Custom profiles available
Can accommodate glazing thickness from 1/4" to 2 3/4"
Factory or field glazed
Retrofit or new construction
ptions include sliding windows, thermal break framing, transparent, architectural or opaque glazings
Stainless steel deal tray with shelf option as plastic laminate or stainless steel